User's Manual
Table Of Contents
- /
- ENGLISH
- DATAPLUG TECHNICAL MANUAL
- Review of the Manual
- INTRODUCTION
- 1 ABOUT THE MANUAL
- 2 LEGEND OF THE SYMBOLS USED
- 3 GLOSSARY
- 4 SAFETY RULES
- 5 OPERATION OF THE RADIO DEVICES
- 6 REGULATORY INFORMATION
- 7 DATAPLUG
- 8 DESCRIPTION
- 9 POWER SUPPLY
- 10 LOCATION OF THE DIAGNOSTIC SOCKET
- 11 INSTALLATION AND CONFIGURATION
- 12 USE
- 13 MAINTENANCE
- 14 BLINK CODES
- 15 TROUBLESHOOTING
- 16 TECHNICAL FEATURES
- 17 ENVIRONMENTAL INFORMATION (For the European Union)
- ENGLISH
14 BLINK CODES
All the indicated statuses are to be intended with the device connected to the
diagnostic socket and the vehicle's instrument panel on.
All the LEDs turn off as soon as the vehicle starts moving.
LED
Flash Meaning
Green Blue Red
X X -
Quick alternate
flash
Device available for the pairing.
X - -
Double flash
BT communication not active.
Configuration in progress.
Quick flash
BT communication not active.
Device configured, waiting to communicate
with the vehicle.
Slow flash
BT communication not active.
Device configured and communicating with
the vehicle.
Normal operation.
- X -
Double flash
BT communication active.
Configuration in progress.
Quick flash
BT communication active.
Device configured, waiting to communicate
with the vehicle.
Slow flash
BT communication active.
Device configured and communicating with
the vehicle.
Normal operation.
X -* X Orange flash Update in progress.
- -* X Flash Error condition.
(*) The status of the blue LED is not relevant.
24