User's Manual
Table Of Contents
- /
- ENGLISH
- DATAPLUG TECHNICAL MANUAL
- Review of the Manual
- INTRODUCTION
- 1 ABOUT THE MANUAL
- 2 LEGEND OF THE SYMBOLS USED
- 3 GLOSSARY
- 4 SAFETY RULES
- 5 OPERATION OF THE RADIO DEVICES
- 6 REGULATORY INFORMATION
- 7 DATAPLUG
- 8 DESCRIPTION
- 9 POWER SUPPLY
- 10 LOCATION OF THE DIAGNOSTIC SOCKET
- 11 INSTALLATION AND CONFIGURATION
- 12 USE
- 13 MAINTENANCE
- 14 BLINK CODES
- 15 TROUBLESHOOTING
- 16 TECHNICAL FEATURES
- 17 ENVIRONMENTAL INFORMATION (For the European Union)
- ENGLISH
•
Do not wet the device with water or other liquids.
•
If not specified otherwise, use the device on vehicles with a 12 V DC power supply
and chassis connected to the negative pole and in ant case only on the supported
vehicles.
•
The connection for the device's power supply must always be with the battery-
operated system of the vehicle being tested.
The electromagnetic compatibility tests carried out on the device
guarantee that it can be adapted to the technologies normally used on
vehicles (ex.: engine control, ABS, airbag, etc.). Nevertheless, if
malfunctions occur, contact the vehicle's dealer.
12