User's Manual

4 SAFETY RULES
The technology used for the design and manufacturing control of the DataPlug
makes it a reliable, simple and safe device to use.
Users of DataPlug are required to follow the general safety rules, to use the
device for its intended use only and to take care of it as indicated in this manual.
4.1 General Rules
•
The user must have carefully read all the information and instructions indicated
in the technical documents provided with the device.
•
Consult an authorised workshop for any doubts regarding how to carry out the
installation properly.
4.2 User Safety
The device was designed and created in order to allow an easy, fast
and safe installation; nevertheless, it is impossible to completely
eliminate some of the risks connected to this operation.
Safety Measures:
•
Make sure the vehicle's instrument panel is off before starting the installation.
•
Make sure the vehicle on which you wish to install the device is on a flat surface
and with the parking brake engaged.
•
Make sure there are not any damaged cables around the diagnostic socket.
•
Be careful not to harm yourself on sharp plastic edges or metal plates around the
diagnostic socket.
The position in which the device is placed and the behaviour of its LEDs
were designed to avoid any possible obstacle or interference for the
driver.
Lack of concentration while driving puts both the driver and the vehicle
in danger.
Safety Measures:
•
Do not drive the vehicle before reassembling the plastic parts and panels
previously removed.
•
Do not get distracted by checking the status of the device or interacting with it
directly or using the display unit.
4.3 Vehicle Safety
The device was designed and created in order to allow an easy, fast
and safe installation; nevertheless, it is best to be sure not to
compromise any vehicle function during this operation.
10