Operation Manual

Helpline No.: UK/N. Ireland: 08000 324976 Rep. of Ireland: 1800 523188 30
Web Support: www.unisupport.net
Setting the Backlight
Selecting this option will alter the radio’s backlight values.
1. After selecting the ‘Backlight’ menu item, the radio will display its list of two menu modes:
‘Timed and Always on’.
• Timed: The backlight will dimmed when there is no user activity for 10 seconds.
• Always on: The backlight will always on.
2. Press the < or > button to highlight the desired menu mode and press SELECT.
Restoring the Factory Settings
1. Press the hold the SELECT button. (Note: if you make a mistake at any point, press the
BACK button to go back to the previous screen.)
2. Press the < or > button until the display says <System Reset>. Press the SELECT button
3. The display shows “Press SELECT to confirm RESET”.
4. Press the SELECT button.
Note: If you do not wish to reset the radio, wait a few seconds without pressing any buttons and
the radio will return to its previous operating condition.