Operation Manual

Helpline No.: UK/N. Ireland: 08000 324976 Rep. of Ireland: 1800 523188 28
Web Support: www.unisupport.net
Setting the alarm
1. Press and HOLD the SELECT button for approx 2 seconds.
(Note: if you make a mistake at any point, press the BACK button to go back to the previous
screen.)
2. Press the < or > button until the display says <Set Alarm>. Press the SELECT button.
< Set Alarm >
3. Press the < or > button and choose Alarm 1 or Alarm 2 configuration. Press the SELECT
button to confirm.
< Alarm 1 >
4. Press the SELECT button to setup the alarm.
Off
< Set Alarm >
5. Press the SELECT button.
Set Alarm
< Off >
6. Press the < or > button to select ON, and press the SELECT button to confirm. Press the
SELECT button.
Set Alarm
< ON >
7. Press the SELECT button.
01:00
< Set Time >
8. Press the SELECT button and press < or > button to set the alarm hour.
Set Hour
< 02:00 >