Operation Manual

Helpline No.: UK/N. Ireland: 08000 324976 Rep. of Ireland: 1800 523188 21
Web Support: www.unisupport.net
Allowing the Radio to Connect:
Locating and playing media files using the radio and UPnP
1. Once the UPnP server is configured to share media files with the Internet radio, you can
play the files by doing the following on the radio.
2. Keep pressing BACK to get to the radio’s top-level menu and then press the < or > button
to select ‘Media Player’.
3. Press SELECT and then press the < or > button to highlight ‘UPNP Servers’.
4. Press SELECT and the radio will scan for all available UPnP servers. Note, it may take a
few seconds for the radio to complete its scan and until the scan has completed, the radio
will display ‘[Empty]’. The radio will continue to display ‘[Empty]’ if no UPnP servers are
found.
5. After a successful scan, select your UPnP server, by using the < or > button if there is
more than one UPnP server, and then press SELECT.
6. The radio will now list the media categories available from the UPnP server, e.g. ‘Music’,
‘Playlists’ etc. Press the < or > button to select which category you wish to browse, press
SELECT and press the < or > button to highlight a sub category and press SELECT again.
For example, you could select ‘Music’ and then ‘Album’.
7. Press the < or > button to highlight the media files that you wish to play and press
SELECT.
8. The radio will display ‘[Add to Queue]’, press SELECT and the radio will add the tracks to
its queue and begin playing them automatically.