Operation Manual

Helpline No.: UK/N. Ireland: 08000 324976 Rep. of Ireland: 1800 523188 14
Web Support: www.unisupport.net
Setting the alarm
1. Press the SELECT button. (Note: if you make a mistake at any point, press the BACK
button to go back to the previous screen.)
2. Press the < or > button until the display says <Configure>.
< Configure >
3. Press the SELECT button.
4. Press the < or > button until the display says <Clock>.
< Clock >
5. Press the < or > button until the display says <Set Alarm>.
< Set Alarm >
6. Press the SELECT button.
Enable Alarm
Yes/No
7. Press the < or > button to swap between Yes and No and press the SELECT button. If
you choose “No” then the alarm is turned off. The display says Alarm is Off for 3 seconds,
then returns to the radio station display.
Alarm is Off
8. If you choose “Yes” then the display enables you to set the time for the alarm.
Set Alarm
15:06