Operation Manual
Helpline No.: UK/N. Ireland: 08000 324976 Rep. of Ireland: 1800 523188 12
Web Support: www.unisupport.net
1. Press the < or > button to choose <Live> or <On Demand>, then press the SELECT
button.
If you choose <Live> then the radio plays the current output from this station as normal.
If you choose <On Demand> then more screens are displayed where you choose what you
want to listen to.
What is displayed will depend on the station you have chosen - the following steps are only a
guide.
2. When you have chosen <On Demand>, the display shows the names of the programs.
Press the < or > button to choose the program you want, then press the SELECT button.
3. When you have chosen the program you want to listen to, either it will just start playing, or
the display may show a list of days for you to choose from - use the < or > button to set the
day the program was broadcast, then press the SELECT button.
4. After you have chosen the day, you may be able to choose the Start Time. Set the Start
Time using the < or > button and press the SELECT button.
5. Programs, which enable you to choose the time also enable you to fast-forward and rewind
to the part you want while the radio is playing. When you press the SKIP TO PREVIOUS
TRACK or SKIP TO NEXT TRACK button, the elapsed time that the program has been
playing is displayed. You can now press the < or > button to change this time. You can
also use the SKIP TO PREVIOUS TRACK or SKIP TO NEXT TRACK buttons to adjust
the time. When you press the SELECT button again, the program will play from that point.
6. Once the Internet radio is playing a program that allows you to choose its start time, the
radio’s preset buttons become playback-control buttons for the stream; e.g. you can press
PAUSE at any time to pause the stream, and then press PLAY to resume playing. It is only
possible to assign this type of stream to a preset numbered 6 – 10, so if you want to assign
the stream to a preset, then press SHIFT followed by a preset button.