Operation Manual

8
Note:
• If the slide feeder is inserted into the scanner from the wrong side you will
damage the scanner’s protective  aps! Such damage cannot be repaired
under warranty!
Slides placed in the bay are pushed into the scanner one by one using the lever loca-
ted on the side of the slide feeder. To do this,  rst push the lever away from the scan-
ner all the way until it stops. Then move the lever carefully back towards the scanner.
The Film located inside the scanner is then removed from the unit, and a new slide is
pushed into the scanner’s viewing area.
Note:
• Be sure to push a new slide slowly into the scanner. Doing this too abruptly
can cause the mechanism to jam. If this happens, pull the lever all the way
back and try again.