User Manual

18 • ULTIMA 40 ACTIVE NG
Restoring the connection with a paired external
player
If your ULTIMA 40 ACTIVE NG was previously
connected to the external player, it is no longer neces-
sary to switch it to pairing mode to connect again.
Simply selecting it on your external player from the list
of paired devices is enough.
Interruption of connection
If your external player moves out of the range of your
ULTIMA 40 ACTIVE NG, the Bluetooth
®
connection will
be interrupted. The connection will be re-established
automatically when you are back within range.
Playback
The volume and sound settings of the external
player also affects the volume and the sound of
the ULTIMA 40 ACTIVE NG.
1. Select the “Bluetooth
®
” input on the
ULTIMA 40 ACTIVE NG. Push the
button (10) or
BLUETOOTH (38) for this.
2. On your external player, switch the Bluetooth
®
function on and select “ULTIMA 40 Aktiv” as the
playback device.
3. Start and control the playback on your source
device.
Depending on the source device, you can also
control playback with the remote control of the
ULTIMA 40 ACTIVE NG:
– Play next track:
Tap the navigation button
(43).
– Play the track or chapter from the beginning:
Tap the navigation button (43).
– Play the previous track or previous chapter:
Tap the navigation button
(43) twice.
– Pause/continue playback:
Push the button
(42)/(15).
If your source device is a smartphone, the Bluetooth
®
connection will be interrupted in the event of an
incoming call and you can make phone calls as usual.
After finishing your phone call, the sounds will
once again be diverted and played back by your
ULTIMA 40 ACTIVE NG.
Terminating the connection
To terminate the Bluetooth
®
connection, switch the
Bluetooth
®
function on your external player/smart-
phone off.
(38)
(42)
(43)
AUX OPT TV
(10) (15)