User Manual

17 • ULTIMA 40 ACTIVE NG
Bluetooth
®
Mode
Via Bluetooth
®
, you can connect a compatible external
player and the ULTIMA 40 ACTIVE NG wirelessly. The
audio output of your external player is then emitted by
the ULTIMA 40 ACTIVE NG.
ULTIMA
ULTIMA
Teufel
The Bluetooth
®
wireless transmission system has a
range of approximately 10 metres that is limited by
walls and furnishings. If the connection is cut off, the
ULTIMA 40 ACTIVE NG will attempt to re-establish a
connection until you select another source.
NOTICE
Only use the Bluetooth
®
function in loca-
tions where wireless radio transmission is
allowed.
Please keep in mind that the Bluetooth
®
behaviour may differ depending on the
external player’s operating system.
Bluetooth
®
options
Depending on the device type, your external player
(e.g. smartphone) may also have a menu for Blue-
tooth
®
options such as media playback. Here you can
activate and deactivate the desired options. You can
find more information about the Bluetooth
®
options in
the user manual for your external player/smartphone.
Bluetooth
®
pairing
To play the audio of your external player on your
ULTIMA 40 ACTIVE NG via Bluetooth
®
, you must first
connect the devices with each other. The technical
term for this is “pairing”.
1. Turn on the Bluetooth
®
function on your external
player (e.g. smartphone).
2. Select the “Bluetooth
®
” input on the
ULTIMA 40 ACTIVE NG. Push the button (10) or
BLUETOOTH (38) for this.
(38)
AUX OPT TV
(10)
3. If the ULTIMA 40 ACTIVE NG is not
connected to an external player,
pairing will start automatically: The
notice “Pairing” will appear on the
display panel (8) and the button
(10) will flash blue.
Otherwise, push the button (10) or BLUETOOTH (38)
and hold it down for approx. 2 seconds to start pairing.
Pairing will be active for approx. 60 seconds.
4. Let your external player scan for Bluetooth
®
devices. You will find more information about this in
the user manual of your external player.
After the search run, the “ULTIMA 40 Aktiv” should
also be present in the list of detected devices.
5. Select “ULTIMA 40 Aktiv” from the list of detected
devices.
6. If your external player asks for a code, enter “0000”
(four zeros).
Pairing is now complete and your
ULTIMA 40 ACTIVE NG will now act as a Bluetooth
®
playback device. The ULTIMA 40 ACTIVE NG will now
play back all sounds that would otherwise be played
by your external player/smartphone.
Teufel
(8)