User Manual

11 • ULTIMA 40 ACTIVE NG
Subwoofer
You can find information about connecting the
ULTIMA 40 ACTIVE NG with a wireless subwoofer on
page 15.
You can connect an active subwoofer to
the SUB OUT jack (22) using an RCA
cable.
You set the required parameters in the
menu later (see „Ext.Sub – External Subwoofer“ on
page 15).
Inputs for source devices
Analogue source
You can connect a source device with
analogue sound (e.g. a CD player or TV
set) to the RCA jacks AUX IN (21). You
will need a stereo connector cable with
RCA plugs for this.
You can set the sensitivity for automatic
activation with the AUTO ON SENSITIVITY control (20)
(see „Automatic activation“ on page 12).
Digital source
You can connect the optical digital
audio output of a source device to the
OPTICAL jack (19). You will need an
optical cable with a TOSLINK plug for this. Your source
device requires either an optical 3.5 mm plug or also
a TOSLINK plug.
TV set with HDMI ARC
TV sets with audio return channel (ARC)
play back the television audio via the
HDMI cable. If your TV supports this
function, connect it with the HDMI ARC
connection (9). You will need a HDMI cable for this.
HDMI CEC (customer electronic control) CEC-compat-
ible devices will exchange control commands via the
HDMI connection. This way, the ULTIMA 40 ACTIVE NG
is switched on and to standby together with the TV
set and the volume is controlled via the TV set’s
remote control. Any change to the volume on the
ULTIMA 40 ACTIVE NG is also reported to the TV set.
(22)
(20)
(21)
(19)
(18)
USB sound card
The ULTIMA 40 ACTIVE NG features an
integrated USB sound card for audio
output from a PC. To do so, connect the
PC to the USB SOUND jack (17) via a
USB cable (USB A to Micro B). You can find informa-
tion about playback from the PC at „USB Sound Card“
on page 19.
Via this USB jack, you can also load software updates
to your ULTIMA 40 ACTIVE NG (see „Software Update“
on page 20).
Mains connection
1. If necessary, ensure that the
POWER main power switch (24) is
switched off (“OFF” position).
2. Insert the IEC power plug of the
mains cord(4) into the jack(25).
3. Insert the mains plug in a
mains power socket (220–
240 V ~/50 Hz).
4. Turn the POWER main power switch (24) on (“ON”
position).
The
button (9) will be continuously illuminated in
red.
AUX OPT TV
(9)
First activation
At first activation, set the language for showing menu
and info texts on the display panel.
1. The notice “Select
language” will appear on
the display panel (8).
2. Use the buttons + (28)
and – (29) to choose
between “Deutsch” and
“English”.
3. Then push the
button (42).
4. The notice “READY TO
RUMBLE” will appear on
the display panel (8).
Your ULTIMA 40 ACTIVE NG is now operational.
(17)
(24)
(25)
(28)
(29)
(42)
Teufel
(8)