Operation Manual

10 • DecoderStation 7

OPTICAL

You can connect the optical digital sound output of a

source device to the jack 8. You will need an optical

cable with a TOSLINK plug for this. Your source requires

either an optical 3.5 mm jack or a TOSLINK jack, too.

Coaxial 1 and Coaxial 2

You can connect the coaxial digital audio outputs of up to

two source devices to the jacks 9. You will need a coaxial

cable with RCA plugs for this.

AUX 1, 2 and 3

You can connect source devices with analogue audio

signals to the jacks 11 and 12. The jack 11 (AUX 1) is a

3.5-mm jack for connecting e.g. a MP3 player. The jacks

12 (AUX 2 and 3) are RCA jacks for connecting e.g. a

cassette or audio tape player.

If you want to connect a record player, which does not

have a line output, use PhonoStation 1 for correct pre-

ampliﬁcation.

Outputs

Television/projector

Connect your television set or your projector to the

“HDMI OUT” jack 17. You will need a HDMI cable for

this.

Audio outputs

Connect your high power ampliﬁer, multi-channel active

subwoofer or active speaker to the RCA jacks 15. You will

need three stereo RCA cables for this:

FRONT LEFT/RIGHT Front left/right channels

CENTER Mid-channel

SUB Subwoofer channel

SURR LEFT/RIGHT Rear left/right channels

In 7.1 operation, the two additional rear channels are

connected to the jacks 14 “RC/Pre Out” (see next para-

graph).

8 9 11