Technical description and operating instructions gb was here Concept E 300 Digital
Technical specifications and operating instructions Concept E 100 / 200/ 300 /400 PC/multimedia/home cinema speaker systems with integrated 5.
For your information The information in this document may be changed without advance notification and does not represent any obligation on the part of Lautsprecher Teufel GmbH. No part of these operating instructions may be copied in any way, or transferred in any form, whether electronically, mechanically, as photocopies or recordings, without the prior written consent of Lautsprecher Teufel GmbH. © Lautsprecher Teufel GmbH Version 1.
Safety information Please read the following safety information carefully. Important: please read through these operating instructions very carefully. It is essential that you take note of all of the safety information and operating instructions before switching on the appliance. Please keep these operating instructions in a safe place for future reference. fective cable must be replaced. Essential: please read the operating instructions.
Introduction to the Concept E 100 · 200 · 300 · 400 Dear Customer, Thank you for purchasing the Concept E System. With this speaker set from Teufel, you have chosen an elegant and powerful multimedia home entertainment system that, despite its compact dimensions, delivers excellent sound quality. This speaker set can be operated either with a a PC or DVD player with decoder.
Unpacking • Contents• Assembly First please check that all system components are included. Unpacking Fold back the flaps on the top of the box, remove the polystyrene packaging and carefully lift each loudspeaker out of the box. All Concept E sets are supplied as a complete system.
Optional accessories (selection) Accessories Because all customers have different requirements, Concept E systems are supplied without connecting cables, wall mounts or bases. We recommend the following articles:* Teufel speaker cable 2 x 2.5 mm2 The highly flexible, unilaterally marked OFC cable has sufficient diameter to ensure unhindered bridging up to 15 meters. The white casing is inconspicuous, and is offered as a cable roll in two lengths: 15 or 30 meters.
Set-up: PC system * Concept E 100/200/300/400 Because the satellite speakers are identical, you can position them any way you like and »designate« one of the five as the centre speaker. * Concept E 300/400 We often recommend positioning the speakers in a diagonal setup on a larger base, and using the cloth cover with the Teufel logo on the side (also supplied).
Set-up: Home cinema system Setting up a home cinema system When using the Teufel set as a home cinema system we recommended focussing on the section of the room where the TV and seats are positioned. It is useful to position the monitor as centrally as possible, from the perspective of the viewer/ listener. Because the centre plays back spoken dialogue, this speaker must be positioned as centrally as possible under or over the TV and inclined or angled towards the listener.
Connection: Satellites Connecting the satellites To do this, cut the cable to the required lengths. Strip the plastic coating from the ends of the speaker cables (as shown). The speakers and amplifier have corresponding [+] and [–] terminals. The [+] cable of the speaker cable is marked accordingly.
Connection: 5.1 sound card Connecting to a 5.1 sound card The Concept E 100/200/300/400 systems are perfect for using with any computer. If your sound card is set up for 5.1 operation, it will usually have three 3.5mm mini-jack outputs. Connect these to the inputs using three cables (3.5 mm stereo minijacks to 2 x cinch) for the front R/L, rear R/L, centre and subwoofer positioned on the back of the Concept E subwoofer.
Connection: DVD player/recorder · Decoderstation Connection to a DVD player/recorder As well as being connected directly to your PC, the Concept E 100/200/300/400 can also be connected straight to a DVD player/recorder. It allows you to create a complete home cinema sound system with just two audio appliances! To control the set directly via a DVD player, the player/recorder must have an integrated Dolby Digital/DTS decoder.
Connection: Stereo sources Connection to stereo sources Stereo sound card, notebook, MP3 player, satellite receiver, TV set, games console, CD player, DJ mixer, Discman, Walkman, etc … You can see just how versatile the Concept E series speakers are. The speaker system can be operated successfully with any of the above appliances. And not just in stereo, but also with virtual surround sound, using the integrated “upmix” function that involves all six of the Concept E speakers.
Operating elements: Subwoofer Q Explanation of symbols Q W Q Speaker Out The arrow-headed lightning symbol in an equilateral triangle indicates the presence of a dangerous non-insulated electrical voltage within the system housing and therefore a risk of electrical shock.
Start-up Start-up Switch the rear mains switch E to »On« to activate the 5.1 amplifier. E Power On Volume Turn the »Volume« dial to control the overall volume of the 5.1 amplifier. Bass Standby Volume Please note If you are going to be away or if the 5.1 amplifier is not going to be used for a long period of time turn the mains switch E to »Off«. Off Min · The ring encircling the round »Standby« button on the front of the woofer lights up »red«.
Troubleshooting The subwoofer is buzzing, what can I do? These buzzing noises may be produced by connected devices or interference in the power supply. Please perform the following test to help determine the cause of the buzzing. 1. Disconnect all cinch cables from the subwoofer’s input jacks. If this eliminates the buzzing noise, please proceed to step B. Otherwise, start with step A. A. Connect the subwoofer’s power cable to a different power circuit (e.g. kitchen or bedroom).
Troubleshooting »The subwoofer does not work when connected to stereo sources, e.g. audio CDs (on PC/DVD player)« The Concept E is purely a replay system – it does not have a built-in decoder function. Therefore it is »dependent« on the allocation of the external decoders when splitting the signals. This decoder is a component of the sound card, DVD player or decoder station software.
Technical specifications and operating instructions Decoderstation 5
Technical description and operating instructions for Decoderstation 5 For your information The information in this document may be changed without advance notification and does not represent any obligation on the part of Lautsprecher Teufel GmbH. No part of these operating instructions may be copied in any way, whether electronically, mechanically, using photocopies or recordings, or transferred without the prior written agreement of Lautsprecher Teufel GmbH. © Lautsprecher Teufel GmbH Version 1.
Contents Technische Beschreibung und Bedienungsanleitung Impaq 400 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Instructions for safety and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instructions for safety and care Please read the following safety information carefully. Risk of suffocation – keep packaging materials (e.g. the plastic bags and film) out of the reach and sight of children.
Teufel Decoderstation 5 Dear Customer, many thanks for buying the Decoderstation 5. You have bought a very high quality decoder, because Teufel appliances are fitted with high quality components and have been carefully made. Please read these instructions carefully before operating the unit and store the manual in a safe place for future reference. If you have any questions you can contact our engineers on +49(30)300 9 300. You can also send us an e-mail using the contact form at www.teufel.eu.
Unpacking · Contents · Attachments You can order the optional attachments shown directly from our online store: www.teufel.eu . Unpacking Fold the flaps on the top of the box outward, remove the rigid foam or polystyrene and carefully lift the appliance out of the box. For your own benefit, we recommend that you do not dispose of the box as it can be used to guarantee safe transport if the device requires servicing later on.
Introduction About the Decoderstation 5 Decoderstation 5 is a stand-alone decoder that can be used to process audio signals from analogue and digital sources. The appliance not only makes it possible to switch between various signals, it can also enhance stereo signal sources, for example, for a surround sound experience.
Function: Front / Display Decoderstation 5 Description of the display and operating elements on the front of the Decoderstation 5. button E mute-button re W turn ol Q dial contr Switching on the Decoderstation 5 Switch on the Decoderstation 5 by pressing the dial control. The appliance will be ready for use after a few seconds. A progress bar will be shown in the display during this time.
Function: Back / Decoderstation 5 Description of the connections on the back of the Decoderstation 5 and their functions. 5.1 Channel Output (Pre Out) A decoded analogue multi-channel sound signal is emitted via an analogue 5.1 output. Alternatively you can also use the outputs for the left and right front channels for reproduction in stereo. One cinch cable is required per channel to connect to an external appliance (e.g.
Function: Remote control With the included remote control you can fully control all of the Decoderstation 5 settings from the comfort of your sofa. Standby Activate the Decoderstation 5 using the standby button of the remote control. Switches the device to active operation (press once) or back into standby mode (by pressing again). You can always tell if the device is ready for operation because the background of the dial control will light up. Mute Pressing the button once will mute the Decoderstation 5.
Function: Remote control Mode You can select the various surround configurations of the Decoderstation 5 by repeatedly pressing this button. Speaker You can select the various speaker configurations of the Decoderstation 5 by repeatedly pressing this button. Test After this button has been pressed, the Decoderstation 5 produces test signals for equalising the speakers. The test signal is then emitted from each loudspeaker in turn (see p. 15 – equalising the speakers).
Connection 5.1 amplifier system, e.g. multichannel subwoofer with 5.1 input Mains power cable Digital audio cable 6 x Cinch cable Digital audio cable 6 x Cinch cable Cinch cable Cinch cable Note You can vary the allocation of inputs. For example, the audio output of a TV set can also be operated from Aux (here: MP3 player). Cinch cable Cinch cable Cinch cable Cinch cable cabel Cinch cable Cinch cable cabel Example allocation of inputs and outputs of the Decoderstation 5 Analogue 5.
Connection The Decoderstation 5 is perfect for combining digital and analogue signal sources. With four digital and three analogue inputs and an analogue 5.1 signal input it offers connections for numerous signal sources. Using the 5.1 input as a 4th stereo input If you require an extra (fourth) stereo input, you can use the 5.1 input for that. Connect your analogue signal source, for example a cassette recorder, to the Front Left and Front Right inputs.
Setting-up the Decoderstation 5 Note The display shows arrows during selection. If you follow these arrows, further choices will be made available. Menu structure You can access the default display settings in the main menu by pressing the push button of the dial control once. You can find more specific information on navigation within the menu structure on page 8. Main Menu Input Menu entry Selection »INPUT« »5.1« »OPT 1« »OPT 2« »COAX 1« »COAX 2« »TV« »CD« »AUX« »SURROUND« »2.1 Stereo« »3.
Setting-up the Decoderstation 5 Overall volume control You can control the overall volume of the Decoderstation 5 at any time by turning the dial control. You can reduce the volume by turning the dial to the left and increase it by turning it to the right. The control area ranges from -54dB to +10dB. If »---« is shown on the display, you have selected the minimum volume.
Setting-up the Decoderstation 5 * Note The Decoderstation 5 memorises the selected surround configuration for each input separately. For example, you can listen to your CDs as a conventional two-channel stereo mix or your DVDs using the optical input, but always in 5.1. ** You only need to equalise the speakers when using a 5.1 surround set. 1. »INPUT« – selecting the input signal You can choose the desired input signal source using the »INPUT« option in the menu. The following are available: »5.
Setting-up the centre delay 5. »DELAY« – Delay * In order for the appliance’s digital signal processor (DSP) to be able to convert Dolby and DTS multi-channel signals perfectly, it must be aware of the spatial positioning of the individual boxes to each other. Distance differences between the speakers can be equalised by using a delay. The aim is that the signals from all speakers reach the listening position at the same time.
Settingup the Decoderstation 5 6. »SPEAKER SIZE« * Notice: When selecting "Large" in the speaker set-up the subwoofer will only reproduce 1 LFE-channel from a multi channel source such as DVD. If there is no discrete LFEchannel (e.g. from a stereo source) the subwoofer will not carry a signal as the bass frequencies are directed to the front speakers. You can tell the Decoderstation 5 the size of your speakers using the »SPEAKER SIZE« menu option. The 5.
Troubleshooting »The rear satellites and/or centre will not play with stereo sources such as music CDs (e.g. via PC or DVD player).« Use the remote control to switch the decoder into Pro Logic mode or into one of the DSP modes (3.1 stereo, 5.1 stereo). »The decoder reacts to the remote control of another appliance / another appliance reacts to the decoder’s remote control.« As there are no clear regulations on the distribution of codes, each manufacturer can work with the code of their choice.
Technical description and operating instructions for the Decoderstation 5 Please contact our service department if you have any questions, suggestions or if there is anything you think we could do better. Lautsprecher Teufel GmbH Bülowstraße 66 10783 Berlin · Germany Tel.: +49(30) 30 09 30 0 Fax: +49(30) 30 09 30 30 www.teufel.eu All information is provided without guarantee of correctness. Subject to technical changes, typing errors and mistakes.