Operation Manual

22 • Radio 3sixty
Check now
The Radio 3sixty immediately checks
whether there is a new firmware
version available.
NOTICE
Risk of damage!
– During an update, the
Radio 3sixty must not be
disconnected from the power
supply!
Service
Only for service: The Radio 3sixty is
switched to DFU mode here.
Setup wizard
You launch the setup wizard here
(see page 14).
Info
Displays the versions of the system
programmes and the ID of the
Radio 3sixty.
Backlight
Here, you set the brightness of the
display panel.
Time after Standby is activated –
duration of illumination in standby:
Always “on” or switch to standby level
after 10–180 seconds.
On level – High, Medium, Low
Standby level – Medium, Low, Off