MSDS

Page 2/7
Safety Data Sheet
acc. to OSHA HCS
Printing date 05/08/2015 Reviewed on 05/08/2015
Trade name: POND ALGAE CONTROL
(Contd. of page 1)
40.0
3 Composition/information on ingredients
·
Chemical characterization: Mixtures
·
Description:
Mixture of the substances listed below with nonhazardous additions.
·
Dangerous components:
31512-74-0 Poly[oxyethylene(dimethyliminio)ethylene(dimethyliminio)ethylene dichloride] 3-<10%
4 First-aid measures
·
Description of first aid measures
·
General information:
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
after the accident.
·
After inhalation:
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
In case of unconsciousness place patient stably in side position for transportation.
·
After skin contact:
Immediately rinse with water.
·
After eye contact:
Rinse opened eye for several minutes under running water.
·
After swallowing:
If symptoms persist consult doctor.
·
Information for doctor:
·
Most important symptoms and effects, both acute and delayed
No further relevant information available.
·
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Fire-fighting measures
·
Extinguishing media
·
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
·
Special hazards arising from the substance or mixture
No further relevant information available.
·
Advice for firefighters
·
Protective equipment:
Mouth respiratory protective device.
6 Accidental release measures
·
Personal precautions, protective equipment and emergency procedures
Not required.
·
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
·
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
·
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
(Contd. on page 3)
USA