Installation Guide

Tetra
®
EdgeLine Cuttable Light Bar Installation Guide
6
Apply and seal the cut end of the LED board
with a brush-on conformal coating such as MG
Chemicals 419D, Humiseal 1B73, or Electrolube
APL. Allow at least 10 minutes to dry.
Apply electrical grade RTV silicone around the
outside circumference of the end cap. Ensure
that the silicone completely seals the joint
between the end cap and light bar.
Push the GELWCAP seal gasket and cap over
the cut end of the light bar.
5
7
6
WARNING / AVERTISSEMENT
Field end-cap must create a water tight seal. All debris must be removed to promote a good end-cap bond and to avoid electrical failure.
Use of other types of saws and/or use of a dull blade may lead to chipping or cracking of the extrusion or create a cut that cannot be sealed
resulting in product failure. Product failures resulting from failure to strictly follow eld cut instructions are not covered by any product
warranty.
L’embout banc garantit l’étanchéité. Les résidus de la coupe doivent être retirés pour permettre une bonne adhésion de l’embout an
d’éviter toute défaillance électrique. L’utilisation d’un autre type de scie ou d’une lame émoussée peut entraîner l’écaillement ou la
ssuration du prol extrudé et peut créer une ouverture ne pouvant pas être scellée avec la possibilité d’une défaillance du produit. Les
défaillances de produit résultant du non-respect des instructions de coupe sur chantier ne sont pas couvertes par les garanties du produit.
SAFETY WARNING / CONSIGNE DE SÉCURITÉ
Failure of eld end-cap to maintain a water tight seal may lead to water ingress and product failure. Product failures of this type could result
in electrical shock and/or re and damage to the product and materials which may come in contact with the product.
Tout défaut d’étanchéité de l’embout peut entraîner des inltrations d’eau et une défaillance du produit. Ce type de défaillances peut
provoquer une électrocution et/ ou un incendie et peut aussi endommager les matériaux en contact avec le produit défectueux.
Cap
Seal Gasket