Installation Guide

Tetra
®
EdgeLine Cuttable Light Bar Installation Guide
4
Cable Specications
Dimensions
Planning
SKU Product Code Detailed Description
93155625 GE-JC24IN-66M-66F 24 Inch Jumper Cable with IP66 Male and IP66 Female Connector
93155628 GE- LC24IN-66F 24 Inch Leader Cable with IP66 Female Connector
93155627 GE-LC24IN-66M 24 Inch Leader Cable with IP66 Male Connector
SKU L L1 (cutting resolution)
GELW4871-1 47-3/8 in. (1203 mm) 3 in. (76 mm)
GELW4865-1 47-3/8 in. (1203 mm) 3 in. (76 mm)
GELW4850-1 47-3/8 in. (1203 mm) 3 in. (76 mm)
GELW4841-1 47-3/8 in. (1203 mm) 3 in. (76 mm)
GELW4832-1 47-3/8 in. (1203 mm) 3 in. (76 mm)
GELW1265-1 11-5/8in. (295mm) 3 in. (76 mm)
GELW4850-1WH 47-3/8 in. (1203mm) 3 in. (76 mm)
For planning the layout, measure the desired length to be lit and divide by the Light Bar Length (L) in the table above to
determine the required quantity of light bars. If it is necessary to cut the light bar for a better t, the cutting resolution is
3 inches (76.2 mm).
Only cut on marks
Female connector
L
L1
3.94 in.
(100 mm)
3.94 in.
(100 mm)
1.74 in.
(44.2 mm)
1.27 in.
(32.2 mm)