Installation Guide

1
- Open "Orders" at Amazon
- Find the product you have purchased and open the product page
- Click Sold by "tetote" -Click"Ask a question"
- Click "An order I have placed"
- Click "Your product" -Click "Other" -Click "Troubleshooting"
Then you can send us messages,we will reply within 24 hours.
Note: After opening the package, Please inspect the product
immediately for damage in transit or missing parts. If there is
any missing, Please contact us by ([e-mail]) or you
can contact us at Amazon by following these steps:
!
!
Manufacturer warranty for 2 year from date of purchase.
Mirror x 1 Bracket x 2 Screws x（4+2）
Positioning Ruler
Wall anchors-A Wall anchors-B
1.Please use in safe voltage range. (100V-120V)
2.Use electrical tape to wrap around the wires to prevent leakage.
3.Do not strike mirror glass with hard or pointed items.
DANGER: Before installation, make sure the
main power is cut off.
WARNING: Installation must be performed
by a qualified licensed electrician.
2
1. Important Safety Instructions:
- Please read all instructions carefully before assembling the item.
- Assembly by two or more adults is highly recommended.
- To connect the wires to electrical junction box, a qualified technician
or electrician is highly recommended.
- Disconnect power before installing, adding or changing any
components.
- Ensure that the fixing location is able to take the weight of the
complete fitting.
- To prevent injury, the mirror must be installed according to these
instructions.
2. Pre-assembly:
- After opening the package, inspect the product immediately upon
receipt for transit damage or missing parts.
- Keep the voltages between 100V and 120V. If the voltage exceeds 120V,
please use transformer.
- You can connect the wires directly to your junction box or the plug.
Note: Thank you very much for using tetote products, in order
to facilitate the use of tetote products, please read this instruction
carefully before you begin installation.
!
3. Before installation, please check to make sure the mirror is working
properly :
① The left button is the anti-fog touch.
In order to prevent wasting energy, the defogging function will
automatically turn off after 1 hour.
0
Corresponding
Holes for
Bracket:
Product Size:
2
7
16
"(62mm)
0 (Where you fix
the first bracket)
20" 22"/24"
11
9
16
"(293.6mm) 14"(355.6mm)9
1
8
"(231.6mm)
Positioning Ruler
Before installation, please
confirm where to drill holes
for hanging the mirror.