Quick Start Guide
www.TetherTools.com
PROJECT SCOPE.
DATE.
FORMAT.
FILE FORMAT.
COLOR MODE.
SPECIF ICATIONSDETAILS DESIGNED & PREPARED BY: Gus Pennock
Tether Tools • Marketing ©2019 Tether Tools
Creative Department |
Air Direct USB C Connection to PC or Mobile - Infographic
01 September 2019
Vector
PDF/AI
CMYK
NOTE: This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Air Direct
QUICK START GUIDE
AD7
QUESTIONS & SUPPORT
Email: customersupport@tethertools.com
Tethered Photography Basics
Are you new to tethering? Learn more at
www.tethertools.com/ 101
Need tethering software? Start here:
www.tethertools.com/software
ADU & Apps, Videos and FAQ
www.tethertools.com/air-direct
Additional Accessories for Air Direct
(sold separately)
΅ Air Direct Replacement Cables
΅ LP/E6/N Battery for Air Direct & Canon
(TT-LP-E6)
΅ Air Direct DC to USB Power Cable
(ADC-DCUSB)
΅ Air Direct ONsite Dual Rapid Charger
(TT-CRG-LPE6)
΅ Air Direct Arca Clamp for L-Bracket (AD-ARCA)
΅ Air Direct Phase One Cable Kit (ADC-PIC)
For more information on our extensive line of products,
please visit us at: www.tethertools.com.
@2019 Tether Tools
Step 3
Access the Wi-Fi Settings on your iOS or Android
mobile device and connect to the Air Direct Wi-Fi
Network, enter the default password, 12345678.
The password will be remembered by your device.
Step 4
On your phone or tablet, launch the Air Remote
App. It must be open and running to communicate
with your camera.
Step 5
Turn the camera ON. The Air Remote App will
recognize your camera and you may begin using
the App.
Notes & Tips for Air Direct to Mobile:
΅ Allow access or permissions to Air Direct
΅ Close all other apps on device, run Air Direct
App only.
΅ Empty the cache regularly (in Settings).
΅ Disabling Bluetooth and Personal Hotspots is
recommended.
΅ Airplane mode may be necessary.
Firmware Update Note:
If you get a firmware update notification, please
update. Please use a fully charged battery or
DC cable when updating the firmware and DO
NOT turn o the Air Direct or the device you are
connected to during the firmware update, as this
may cause a malfunction.
TO CONNECT TO YOUR iOS OR ANDROID
MOBILE DEVICE WITH SELECT SUPPORTED
CANON AND NIKON CAMERAS:
First time use:
1. Download the Air Remote App for iOS or
Android.
2. Install the App on your mobile device.
Quick Start Steps
Step 1
Connect the Air Direct to the camera by inserting
the supplied compatible camera connector cable
into the Air Direct and the camera’s USB data port.
Keep the camera turned o.
Step 2
On the Air Direct, set the switch to MOBILE and turn
the Power ON.
The Air Direct Wi-Fi network (indicated by the blue
light) will initiate. After 10 seconds, the blue light
will blink fast for approximately five seconds, then
slow blink for approximately 10 seconds, then turn
to a solid blue light. Once solid, the Air Direct Wi-Fi
network is ready for connection.