FAQ

It can set working time, but cannot set end time.
You can schedule to let the robot start cleaning from a certain time .It will be back to
charging base after finishing or low battery. Please press the clean button on remote
control, if needs end early.
Why is the power suction reduced?
1. Please check whether the filter is stained or not, if is, please clean or replace it.
2. Check whether the suction inlet is blocked by scrap, or this situation meaning under
low electric quantity. It is advised to clean and charge immediately.
Why has the robot’s cleaning efficiency decreased?
The filter may be clogged. Remover the filter, and clean it with warm water, then let it
dry completely, then place it back in the filter slot. If the filter is over 6 months old, it is
advised to replace it with a new filter.
Pick up large items and keep areas to be cleaned open.
Clean the side brushes, bristle brush and sensors regularly.
Empty the dust bin before using, which will allow for better airflow and efficient cleaning.
Contact Us
Email: [e-mail]