Technical Specifications

TECHNICAL DATA
TES-34
TESTORS
®
CRAFT
POURING PAINT SET
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: [phone]
www.rustoleum.com/testors
Form: ARJ-2005
Rev.: 022720
DESCRIPTION AND USES
Testors
®
Craft Pouring Paint Sets are high quality waterbased
paints for general craft use and decorative paint. For use on
wood, metal, plastic, and glass. Great for pouring projects or
create unique marbling effect.
PRODUCTS
3 Color Set
SKU: 352451
Set Contents (2oz.)
Gold, White, and Fuchsia
3 Color Set
SKU: 352454
Set Contents (2 oz.)
Turquoise, Silver, and Black
PRODUCT APPLICATION
SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical contaminants.
Rinse with fresh water and allow to thoroughly dry.
APPLICATION
Use at room temperature 70°F (21°C) and humidity is below
60%. Shake paints to ensure fully mixed. Allow to set for
several minutes to avoid air bubbles.
Before pouring paint onto the surface, wear gloves for
easier clean-up. Simply pour colors directly on surface one
color at a time or mix your colors together crating your own
color palette. Tilt surface to create a marbled effect. Allow to
dry for at least 24 hours.
CLEAN-UP
Clean brush and other application tools immediately with
soap and water.
PHYSICAL PROPERTIES
TESTORS CRAFT POURING PAINT SET
Resin
Acrylic WB Emulsion
Pigment
Varies by color
Solids By Weight
30-38%
VOC
<60 g/l
Dry Times at 77°F
(25°C) and 50%
Relative Humidity
Touch
1-3 hours
Handle
4-8 hours
Full Cure
Minimum of 24 hours
Shelf Life
2 Years
Flash Point
>200°F (>93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.