MSDS

Date Printed: 12/2/2014
HYGIENIC PRACTICES: Wash thoroughly with soap and water before eating, drinking or smoking. Remove contaminated clothing
immediately and launder before reuse.
9. Physical and Chemical Properties
Vapor Density Heavier than Air Odor: Solvent Like
Appearance: Liquid Evaporation Rate: Slower than Ether
Solubility in Water: Negligible Freeze Point: N.D.
Specific Gravity: 1.011 pH: N.A.
Physical State: Liquid
(See section 16 for abbreviation legend)
10. Stability and Reactivity
CONDITIONS TO AVOID: Avoid temperatures above 120 ° F. Avoid contact with strong acid and strong bases. Avoid all possible
sources of ignition.
INCOMPATIBILITY: Incompatible with strong oxidizing agents, strong acids and strong alkalies.
HAZARDOUS DECOMPOSITION: By open flame, carbon monoxide and carbon dioxide. When heated to decomposition, it emits
acrid smoke and irritating fumes. Contains solvents which may form carbon monoxide, carbon dioxide, and formaldehyde.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
11. Toxicological Information
Chemical Name LD50 LC50
Mineral Spirits >5000 mg/kg (Rat, Oral) >1400 ppm (Rat, Inhalation, 4Hr)
Titanium Dioxide >7500 mg/kg (Rat, Oral) N.E.
Stoddard Solvents >5000 mg/kg (Rat, Oral) N.E.
Aliphatic Hydrocarbon >5000 mg/kg (Rat, Oral) N.E.
Xylene 4300 mg/kg (Rat, Oral) 5000 ppm (Rat, Inhalation, 4Hr)
Amorphous Silica >7500 mg/kg (Rat) >250 mg/m3 (Rat, 6Hr)
Ethylbenzene 3500 mg/kg (Rat, Oral) N.E.
12. Ecological Information
ECOLOGICAL INFORMATION: Product is a mixture of listed components.
13. Disposal Information
DISPOSAL INFORMATION: Dispose of material in accordance to local, state, and federal regulations and ordinances. Do not allow
to enter waterways, wastewater, soil, storm drains or sewer systems.
Page 3 / 5