User Manual

6 Using the product
54
Options:
> [Options] → Clipboard: data is saved to the clipboard.
> [Options] → Delete clipboard: any data saved to the clipboard
is deleted.
> [Options] → Save: the measured values are saved in a record.
> [Options] → Measurement view: (This function is not available
during a measurement): the measured value display menu is
opened.
Pos: 90 /TD/Produkt ver wenden/testo 320/ testo 320 Diff_Tempera turmessung @ 11\mod_13274112 87226_79.docx @ 105187 @ 355 @ 1
6.2.10. Differential temperature
✓ The differential temperature set (0554 1208) must be
connected.
Call up function:
> [ ] → Measurement options → [OK] → Differential
temperature → [OK].
Carrying out the measurement:
1. Start measurement: [ ].
- The measured values and the calculated differential
temperature (T1 - T2) are displayed.
2. End measurement: [ ].
Options:
> [Options] → Clipboard: Data is saved to the clipboard.
> [Options] → Delete clipboard: Any data saved to the clipboard
is deleted.
> [Options] → Save: The measured values are saved in a
record.
> [Options] → Measurement view: (This function is not available
during a measurement): The measured value display menu is
opened.
Pos: 91 /TD/Produkt ver wenden/testo 320/tes to 320 Zuluft @ 11\mod_13274 11374804_79.doc x @ 105220 @ 355 @ 1
6.2.11. O2 air
✓ An O2 dual wall clearance probe (0632 1260) must be
connected.
Call up function:
> [ ] → Measurement options → [OK] → O2air → [OK].