Datasheet

68
testo Saveris™ System overview
testo Saveris radio probe
Probe versions with internal and external
temperature and humidity sensors allow the
adaptation to every application. The radio
probes are available with or without a display as
an option. The memory in the probe ensures
that the measurement data is not lost in the
event of an interference in the radio link. Current
measurement data, the battery status and the
quality of the radio link are shown in the display.
testo Saveris
converter
testo Saveris
router
testo Saveris
wireless probe
testo Saveris Ethernet probe
testo Saveris wireless probe
testo Saveris Ethernet probe
In addition to the wireless probes, probes can
be used which are directly connectable to the
Ethernet. This allows the existing LAN
infrastructure to be used, making data transfer
from the probe to the base possible, even over
long distances.
By connecting a converter to an Ethernet
socket, the signal from a wireless probe can be
converted to an Ethernet signal. This combines
the flexible positioning of a wireless probe with
the use of the existing Ethernet even over long
transfer distances.
Humidity/differential pressure
transmitters
testo 6651/6681/6351/6381
Thanks to the integration of the humidity
transmitter, measurement data monitoring is
possible parallel to the control. This provides the
solution for highest accuracy as well as for
special applications (high humidity, trace
humidity etc.) in compressed air, drying and air
conditioning technology.
Find out more at www.testo.com/transmitter
testo Saveris router
The radio link can be improved or lengthened
with poor structural conditions by using a router.
Naturally several routers are possible in the testo
Saveris system, but several routers are not
connected in series.
testo Saveris analog coupler
The two versions of the analog coupler
(wireless/Ethernet) allow the inclusion of further
measurement parameters into the testo Saveris
monitoring system, by integrating all transmitters
with standardized current/voltage interfaces, e.
g. 4 to 20 mA or 0 to 10 V.
testo Saveris
analog coupler
(Wireless)
Ethernet
testo Saveris
analog coupler
(Ethernet)
Through the connection of a converter to an
Ethernet jack, the signal of a radio probe can be
converted into an Ethernet signal. This
combines the flexible connection of the radio
probe with the use of the existing Ethernet even
over long transmission paths.
Humidity
transmitter