Datasheet
45
Ø 16 mm
Ø 18 mm
Ø 24 mm
Ø 36 mm
Ø 68 mm
Ø 100 mm
2000 mm
1500 mm
1000 mm
500 mm
700 mm
testo 830-T4, non-contact temperature measurement on small surfaces at a large distance
The universal infrared
thermometer with 30:1 optics
makes it possible to measure
temperatures at a safe distance
from the object being measured.
The spot diameter at a distance
of 1 m is only 3.6 cm.
The 2-point laser marks the
diameter of the spot thereby
preventing areas outside the
object from being measured.
With a resolution of 0.1 °C, even
the smallest differences in
temperature can be detected and
dynamic temperature processes
analysed.
testo 830-T4
Checking temperature on a compressor
Temperature measurement
with external probe
• 30:1 optics for measuring
temperature at a distance, even
on small objects
• 2-point laser for spot sighting
• Display of current value and
Hold value
• Emissivity determination with
external temperature probe
• Audible and optical alarm when
limit values are exceeded
• Fast measurement value
recording at two measurements
per second
• Display illumination
Part no. 0560 8304
IR temperature measuring instrument
with 30:1 optics and 2-point laser
measurement spot sighting, incl.
battery and factory calibration
certificate with the meas. points +80
°C and +350 °C
testo 830-T4
Accessories Ordering data
Adhesive tape, e.g. for bare surfaces (roll, L.: 10 m, W.: 25
mm), E = 0.95, temperature resistant to +250 °C
0554 0051
Leather case to protect measuring instrument, including belt
holder
0516 8302
Fast-action surface probe with sprung thermocouple strip, also
for uneven surfaces, measurement range short-term to
+500°C, TC Type K
0602 0393
ISO calibration certificate/temperature, infrared thermometer;
calibration points +60°C; +120°C; +180°C
0520 0002
ISO calibration certificate/temperature, meas. instr. with surface
probe; calibration points +60°C; +120°C; +180°C
0520 0071
Part no.
Technical data Infrared thermometer
Contact measurement (Type K)
Meas. range -30 to +400 °C -50 to +500 °C
Resolution 0,1 °C 0.1 °C
Accuracy
±1 digit
at +23 °C ambient
temperature
±1,5 °C (-20 to 0 °C)
±2 °C (-30 to -20,1 °C)
±1 °C or 1% of mv
(remaining range)
±0,5 °C +0,5% of mv
Measuring rate 0,5 s
Oper. temp. -20 to +50 °C
Storage temp. -40 to +70 °C
Emissivity Adjustable 0.2 to 1.0
Spectral range 8 to 14 µm
Battery type 9V block battery
Battery life 15 h
Dimensions 190 x 75 x 38 mm
Optical resolution
D:S
30:1 (typical at a distance of 0.7 m to the measurement
object) 24 mm @ 700 mm (90 %)
Part no. 0563 8304
testo 830-T4 set, consisting of testo
830-T4 with protective leather case,
incl. cross-band surface probe, battery
and factory calibration certificate with
the measurement points +80 °C and
+350 °C
Set testo 830-T4
testo 830-T4, 2-point laser for spot sighting
30:1 optics










