Datasheet
26
Suitable probes at a glance
Meas. range AccuracyIllustrationAir probes Part no.t99
115 mm
Ø 4 mm
Robust air probe, T/C Type K
0602 1793
-60 to +400 °C
Class 2 25 s
Meas. range AccuracyIllustrationSurface probes Part no.t99
115 mm
Ø 5 mm Ø 12 mm
Fast-action surface probe with sprung ther-
mocouple strip, also for uneven surfaces,
measurement range short-term to +500°C,
TC Type K
0602 0393
-60 to +300 °C
Class 2 3 s
150 mm
Ø 2.5 mm Ø 4 mm
Efficient, waterproof surface probe with small
measurement head for flat surfaces,
TC Type K
0602 0693-60 to +1000
°C
Class 1 20 s
80 mm
Ø 5 mm
50 mm
Ø 12 mm
Fast-action surface probe with sprung ther-
mocouple strip, bent, also for uneven surfa-
ces, measurement range short-term to
+500°C, TC Type K
0602 0993
-60 to +300 °C
Class 2 3 s
680 mm
Ø 25 mm
12 mm
Flat head surface probe with telescopic
handle max. 680 mm for measurements at
hard-to-access points, TC Type K
0602 2394
-50 to +250 °C
Class 2 3 s
35 mm
Ø 20 mm
Magnetic probe, adhesive force approx. 20 N,
with magnets, for measurements on metal
surfaces, TC Type K
0602 4792
-50 to +170 °C
Class 2
75 mm
Ø 21 mm
Magnetic probe, adhesive force approx. 10 N,
with magnets, for higher temp., for measure-
ments on metal surfaces, TC Type K
0602 4892
-50 to +400 °C
Class 2
115 mm
Ø 5 mm Ø 6 mm
Waterproof surface probe with widened mea-
surement tip for flat surfaces, T/C Type K
0602 1993
-60 to +400 °C
Class 2 30 s
395 mm
20 mm
Pipe wrap probe with Velcro strip, for tempera-
ture measurement on pipes with diameter up to
max. 120 mm, Tmax +120°C, TC Type K
0628 0020
-50 to +120 °C
Class 1 90 s
Pipe wrap probe for pipe diameter 5 to 65
mm, with exchangeable measuring head.
Meas. range short-term to +280°C, TC Type
K
0602 4592
-60 to +130 °C
Class 2 5 s
35 mm
15 mm
Spare meas. head for pipe wrap probe, TC
Type K
0602 0092
-60 to +130 °C
Class 2 5 s
Clamp probe for measurements on pipes,
pipe diameter 15 to 25 mm (max. 1"), meas.
range short-term up to +130°C, TC Type K
0602 4692
-50 to +100 °C
Class 2 5 s
Meas. range AccuracyIllustrationImmers./penetr. probes Part no.t99
500 mm Ø 1.5 mm
Immersion tip, flexible, TC Type K
0602 5792-200 to +1000
°C
Class 1 5 s
114 mm
Ø 5 mm
50 mm
Ø 3.7 mm
Waterproof immersion/penetration probe,
TC Type K
0602 1293
-60 to +400 °C
Class 2 7 s
300 mm
Ø 1.5 mm
Efficient and fast-action immersion probe, wa-
terproof, TC Type K
0602 0593
-60 to +1000
°C
Class 1 2 s
60 mm
Ø 5 mm
14 mm
Ø 1.5 mm
Fast-action, waterproof immersion/penetra-
tion probe, TC Type K (Calibration not possi-
ble over +300 °C)
0602 2693
-60 to +800 °C
Class 1 3 s
295 mm
Ø 4 mm
Highly accurate Pt100 immersion/pene-
tration probe incl. factory certificate (test
points 0 °C and +156 °C)
0614 023560 s-40 to +300
°C
±0.05 °C (+0.01 to +100
°C)
±(0.05 °C +0.05% of mv)
(remaining range)
500 mm
Ø 0.25 mm
Flexible, low-mass immersion measurement tip, ideal
for measurements in small volumes such as petri dis-
hes, or for surface measurements (e.g. attached with
adhesive tape), TC Type K
0602 04931 s-200 to
+1000 °C
Class 1
Conn.: 2 m, FEP insulated thermal wire, temperature proof up to 200 °C, oval
wire with dimensions: 2.2 mm x 1.4 mm
Fast-reaction paddle surface probe, for mea-
surements in inaccessible places, e.g. narrow
apertures and slots, TC Type K
0602 01935 s0 to +300 °C Class 2
40 mm
145 mm
Ø 8 mm
Ø 7
mm
500 mm
Ø 1.5 mm
Immersion tip, flexible, TC Type K
0602 57935 s-200 to +40 °C Class 3
1000 mm Ø 3 mm
Immersion measurement tip, flexible, for mea-
surements in air/exhaust gases (not suitable
for measurements in smelters), TC Type K
0602 5693-200 to +1300 °C Class 1 4 s
Conn.: Fixed cable, 1.6 m
(correspondingly shorter when telescope extended)