User Manual

10 Tips and assistance
23
Feature Measuring
range
Resolution Accuracy
Frequency
measurement
17
,
18
600.0 Hz
6.000 kHz
60.00 kHz
600.0 kHz
6.000 MHz
60.00 MHz
0.1 Hz
1 Hz
10 Hz
100 Hz
1 kHz
10 kHz
± (0.1% + 1 digits)
Frequency with
voltage/current
19
99.99 Hz
999.9 Hz
9.999 kHz
0.01 Hz
0.1 Hz
1 Hz
± (0.1% + 1 digits)
Temperature with
adapter
20
-20 to 500 °C
0.2 °C -20 to 0 °C ± 2 °C
0 to 99.99 °C ± 1 °C
100 to 249.99 °C ± 1.5%
>250 °C ± 2%
Current with
adapter
21
400 A
0.1 A ± (2% of meas. val.+ 5
digits)
Figures correspond to +23 °C ± 5 °C at <80% rel. humidity. Temperature
coefficient: 0.15 x specified accuracy per 1 °C (<18 °C and >28 °C)
10 Tips and assistance
10.1. Questions and answers
Question Possible causes/solution
OL The reading exceeds the measuring range upper limit
> Check input value and change if necessary.
LEAd No probe tip in the jack or invalid arrangement with
warning to the user
> Connect missing probe tip.
> Check arrangement and correct if necessary.
dISC The capacitor to be tested still contains charge.
> Discharge capacitor properly and carry out the test
again.
OPEn No connection to the probe tips during the RCDC
measuring mode.
> Establish a connection to the measurement object.
16
Maximum measurement duration is 13.2 s
17
Frequency measurement as separate function
18
Below 2 Hz the display shows 0 Hz
19
Frequency measurement is not specified for alternating currents or
voltages below 3% of the smallest respective measuring range
20
Does not include the measurement error of the temperature probe. The
specified accuracy is the sum total of the measurement errors of the
thermocouple adapter and the instrument.
21
The specified accuracy does not include the measurement error of the
instrument