Datasheet

4 First steps
6
Pos: 14 /TD/Überschr iften/5. Erste Schr itte @ 0\mod_1173774895039_ 79.doc @ 319 @ 1 @ 1
4 First steps
Pos: 15 /TD/Erste Sc hritte/Comfort Soft ware 4/ComSoft 4-174/Sof tware herunterladen @ 5\m od_1267521355454_7 9.doc @ 59460 @ 2 @ 1
4.1. Downloading software
The testo Comfort Software Basic 5 software can be
ordered on CD (article no. 0572 0580) if the download from
the Internet is not desired.
1. Download testo Comfort Software Basic 5 software in the
Internet free of charge at www.testo.com/download-center
(registration required).
2. Save Zip file with software.
Pos: 16 /TD/Überschr iften/5.1 Software / Treiber installieren @ 0\ mod_1187269789390_79. doc @ 2394 @ 2 @ 1
4.2. Installing the software/driver
Pos: 17 /TD/(War n-)Hinweise/Software/ Hinweis: Adminrec hte zur Installation @ 0\mod _1187694128421_79.doc @ 2461 @ @ 1
Administrator rights are required for installation.
Pos: 18 /TD/Erste Sc hritte/Comfort Soft ware 4/ComSoft 4-174/Sof tware installieren @ 5\ mod_1267521324470_79. doc @ 59428 @ @ 1
1. Select the folder in which the downloaded Zip-file was saved
and unpack the Zip-file.
Or
1. Insert the program CD into the CD-ROM drive of the computer.
2. Start the file Setup.exe.
3. Follow the instructions of the installation wizard.
When installing under Vista, please pay attention to the following
steps during the installation process:
• The window User account control is opened:
> Click on [Next].
• The window Windows Security is opened:
> Choose Still install this driver software.
4. Click on [Complete] to complete the software installation.
After completion of the software installation, the instrument must be
connected to the PC to continue with the driver installation.
5. Use the USB-cable to connect the instrument to the PC.
- The connection will be set up.
- The driver installation will be executed automatically.
In some cases, the instrument driver may not be automatically
recognized. In this case, continue as follows:
7 / 19