Datasheet

5 Using the product
13
2. Click on [Transfer to instrument].
- The settings are transferred to the data logger.
Pos: 27 /TD/Produkt verwenden/testo Comsof t Basic 5/Messdaten impor tieren @ 6\mod_128032569 8386_79.doc @ 67439 @ 255 @ 1
5.5. Import measurement data
From the instrument
✓ The instrument is connected to the PC and has recorded
measurement data.
1. Choose Import of measurement data from the start page or
via menu Evaluate | Import | Read data.
- Details concerning measurement data like instrument name,
serial number and location are displayed.
2. Click on the folder icon to select the path under which the
measurement data are to be saved.
3. Click on [Import].
- The screen changes to the tab Import history.
- The status bar of the current import and previously performed
import processes are displayed.
- Once the import of measurement data has been completed the
display will change to the Evaluation section.
From SD-card
✓ Measurement data were copied to the SD-card, see operating
instructions of the instrument.
✓ SD-card connected to PC.
1. Select menu Evaluate | Evaluate measurement data.
2. Click on [Open file].
3. Choose SD-card.
4. Choose the file type SD Card (*.*).
14 / 19