Datasheet

5 Using the product
10
The status display only serves the purpose of information.
The values cannot be edited.
For data loggers (0563 1741, 0563 1754-1761, 0563 1771-1775,
0554 1778)
1. Choose the COM-Port (usually the COM-Port with the highest
number, otherwise see section under "If not possible to
connect").
2. Choose the desired instrument and click on [Connect].
Only one instrument can be connected at a time.
- The instrument appears in the status display to the left of the
menu bar.
- The button [Connect] changes to [Disconnect].
- The Instrument | Status is displayed.
The status display only serves the purpose of information.
The values cannot be edited.
If not possible to connect:
Under Windows XP:
1. Choose Start | Settings | System control | System |
Hardware | Device manager.
Under Windows Vista:
1. Choose Start | System control | System and maintenance |
Device manager.
Under Windows 7:
1. Choose Start | System control | System and security |
System | Device manager.
2. Click on Connections (COM and LPT).
- The entries of these categories are displayed.
3. Search for entries "Testo ...", followed by a COM interface
number.
4. Select this individual COM interface number in the selection
field (3).
5. Click on [Connect].
The COM interface number will only remain equal if you
connect the USB interface always to the same USB-port or
leave it plugged in.
11 / 19