Data Sheet

8 Using the product
40
8.4.4 Auto Tfac (Temperature compensation
factor)
A surface compensation factor has been set in the measuring instrument to
reduce the measuring errors in the main field of applications. This reduces
measuring errors when using surface temperature probes.
Surface temperature probe
An NTC temperature probe (accessory) must be connected for
measuring the pipe temperature and for automatic calculation of
superheating and subcooling.

The Settings menu is activated.
1
Select Auto Tfac and press
[Menu/Enter] to confirm.
-
Menu properties are displayed.
2
Press
[▲] / [▼]
to select
On/Off
and
press [Menu/Enter] to confirm.
Press [▲] / [▼] to select the question mark icon and [Menu/Enter]
to open. You will obtain further information on temperature
compensation.
3
Press [ESC]: 1x main menu view, 2 x measurement menu view