Data Sheet
Table Of Contents
- 1 About this document
- 2 Safety and disposal
- 3 Product-specific approvals
- 4 Product-specific information
- 5 Use
- 6 Product description
- 7 First steps
- 8 Using the product
- 9 Smart App
- 10 Maintenance
- 11 Technical data
- 12 Tips and assistance
- 13 Support
8 Using the product
29
8.2.5 Compressor Test (DLT)
For this mode, 3 temperature probes are used. In addition to the conventional
temperature sensors for superheating and subcooling, an additional temperature
probe must be connected via Bluetooth.
The testo 115i (clamp thermometer) or fixed cable probes are used to
carry out the measurement.
Before each measurement, check that the refrigerant hoses are in
flawless condition.
Before each measurement, zero the pressure sensors.
The instrument is switched on and the measurement menu is
displayed.
1
Press [Menu/Enter].
2
Press [▲] / [▼] to select Measuring
Mode and press [Menu/Enter] to
confirm.
-
The Measuring Mode menu is
displayed.