Data Sheet
Table Of Contents
- 1 About this document
- 2 Safety and disposal
- 3 Product-specific approvals
- 4 Product-specific information
- 5 Use
- 6 Product description
- 7 First steps
- 8 Using the product
- 9 Smart App
- 10 Maintenance
- 11 Technical data
- 12 Tips and assistance
- 13 Support
8 Using the product
26
-
The Measuring Mode menu is
displayed.
3
Press [▲] / [▼] to select Target Superheat and press [Menu/Enter]
to confirm.
-
The Configure Target Superheat
menu is displayed.
The values can either be configured manually via Manual Input or
recorded by the testo 605i via Smart Probe. When a Smart Probe is
selected, available testo 650i instruments are displayed for the
connection.
4
Adjust values for Outdoor Dry Bulb Temp.
4.1
Press the [▲] key and in the Outdoor Dry Bulb Temp. field, select
Manual Input.
4.2
Press [Menu/Enter] to confirm.
-
The field is activated.
4.3
Press [▲] / [▼] to set the value.
4.4
Press [Menu/Enter] to confirm.
5
Adjust the Return Air Wet Bulb Temp. value