Manual
Table Of Contents
- 1 About this document
- 2 Safety and disposal
- 3 Support
- 4 Scope of delivery
- 5 Product description
- 6 Commissioning
- 7 WLAN connection – using the App
- 8 Bluetooth® connection
- 9 Performing the measurement
- 9.1 Saving an image
- 9.2 Setting measuring functions
- 9.3 Image gallery
- 9.4 Scale
- 9.5 Emissivity
- 9.6 Palette
- 9.7 Image type
- 9.8 SiteRecognition
- 9.9 Voice annotation
- 9.10 Configuration
- 10 Maintenance
- 11 Technical data
- 12 Questions and answers
- 13 Accessories
9 Performing the measurement
49
1
Open the Menu.
2
Select Scale (joystick or touchscreen).
Scale opens.
3
Select ScaleAssist.
4
Move the joystick to the right, select Temp. In (indoor temperature).
Move the joystick up/down to set the value.
5
Move the joystick to the right, select Temp. Out (outdoor temperature).
Move the joystick up/down to set the value.
6
If necessary, move the joystick to the left, back to the mode menu.
7
Confirm selection with or exit the menu with X.
Manual scaling is activated. S is displayed at bottom right.
9.5 Emissivity
You can choose between user-defined emissivity and 8 materials with
permanently set emissivity. The reflected temperature (RTC) can be set
individually.