Manual

9 Performing the measurement
37
4
Enable Active.


appears.
5
Select the differential temperature to be calculated (joystick or
touchscreen) (PA vs. PB, PA vs. Probe, PA vs. Value, PA vs. RTC).
5.1
PA vs. PB selection:
o Move the joystick to the right (or via touchscreen) -> select
measuring point A -> press OK -
> move the measuring point to
the live image using the joystick -> press OK.
o Move the joystick to the right (or via touchscreen) -> select
measuring point B -> press OK -> move the
measuring point to
the live image using the joystick -> press OK.
o End measurement: Move the joystick to the right (or via
touchscreen), confirm with .
5.2
PA vs. Probe selection:
o Move the joystick to the right (or via touchscreen) -> select
measuring point A -> press OK -
> move the measuring point to
the live image using the joystick -> press OK.
o End measurement: Move the joystick to the right (or via
touchscreen), confirm with .
5.3
PA vs. Value selection:
o Move the joystick to the right (or via touchscreen) -> select
measuring point A -> press OK -
> move the measuring point to
the live image using the joystick -> press OK.
o Move the joystick to the right (or via touchscreen), set the
value manually.
o End measurement: Move the joystick to the right (or via
touchscreen), confirm with .
5.4
PA vs. RTC selection:
o Move the joystick to the right (or via touchscreen) -> select
measuring point A -> press OK -
> move the measuring point to
the live image using the joystick -> press OK.
o Move the joystick to the right (or via touchscreen), set the
value manually.
o End measurement: Move the joystick to the right (or via
touchscreen), confirm with .
6
Confirm with .

The settings remain visible or retained in the measurement view.