User Manual

7 Maintaining the product
19
7 Maintaining the product
Cleaning the instrument
Do not use harsh cleaning agents or solvents! Mild soap and
water may be used.
> Clean instrument using a damp cloth.
Keeping connections clean
> Keep screw connections clean and free of grease and other
deposits, clean with a moist cloth as required.
Removing oil residues
> Carefully blow out oil residues in valve block using compressed
air.
To ensure measuring accuracy
> Check instrument regularly for leaks (recommended: annually).
Do not exceed the pressure range!
> Calibrate instrument regularly (recommended: annually).
Changing batteries/rechargeable batteries
✓ Instrument is switched off.
1. Fold out the hook, loosen the clip and remove the cover of the
battery compartment.
2. Remove discharged batteries/rechargeable batteries and insert
new batteries/rechargeable batteries (4x 1.5 V, type AA,
Mignon, LR6) in the battery compartment. Observe the polarity!
3. Set on and close cover of the battery compartment (clip must
engage).
4. Switch the instrument on.