User Manual

6 Using the product
35
This function is available as an additional option (article
no. 0554 7806) and must be activated before it can be
used, if the option was not ordered at the same time as
the imager.
Activate function (only with subsequent order):
You will receive an envelope with an access code
(identification code), which you should enter on the
website www.testo.com/upgrade.
When all necessary data has been entered, an
activation code is generated and can be used to
activate the function via the IRSoft PC software. Please
observe the installation requirements and steps on the
website or in the email sent to you.
Activate/deactivate function:
1. [OK] | Configuration… | [OK] | SuperResolution | [OK].
2. Press [OK] to activate ( ) or deactivate ( ) the
SuperResolution option.
3. Confirm the settings with [Apply].
When you save an image, an information window with the image
file name is displayed. If SuperResolution is activated ( ), SR is
also displayed after the file name.
Power-save options…
Options can be set to extend the rechargeable battery running time.
1. [OK] | Configuration… | [OK] | Power-save options… | [OK].
- The Power-save options dialogue is opened.
2. Move Joystick up/down to select the desired option.
- The selected option has an orange border ( ).
3. Confirm the selection with [OK].
- LCD backlight: The selected setting is highlighted orange and
can be changed ( ).