Manual
Table Of Contents
- 1 About this document
- 2 Safety and disposal
- 3 Support
- 4 Scope of delivery
- 5 Product description
- 6 Commissioning
- 7 WLAN connection – using the App
- 8 Bluetooth® connection
- 9 Performing the measurement
- 9.1 Saving an image
- 9.2 Setting measuring functions
- 9.3 Image gallery
- 9.4 Scale
- 9.5 Emissivity
- 9.6 Palette
- 9.7 Image type
- 9.8 SiteRecognition
- 9.9 Voice annotation
- 9.10 Configuration
- 10 Maintenance
- 11 Technical data
- 12 Questions and answers
- 13 Accessories
9 Performing the measurement
57
To exit the measuring location, press Esc or touch the bottom left
corner. Run SiteRecognition again.
9.9 Voice annotation
Voice annotation can only be used if an image is active on the display
and a BT audio connection has been established with the headset.
A preview image must be enabled in the settings.
An image has just been created or selected from the image gallery.
1
Open the Menu.
2
Select Voice annotation (joystick or touchscreen).
Voice annotation opens.
3
Click on recording .
Recording timer starts running.