Manual

8 Bluetooth® connection
30

Measurement settings opens.
3
Select External values (joystick or touchscreen).

External values opens.
4
Select the required size (joystick or touchscreen).
5
Confirm selection with  or exit the menu with X.

Clamp meter readings are displayed in the header.
Readings are only transferred if the current, voltage or power is set on
the clamp meter.
When connected to the humidity probe

Bluetooth® connection is activated and the humidity probe is switched
on.

In the Measurement settings -> External values menu, the Humidity
measurement function is selected.

The thermal imager switches automatically to humidity measurement.

Humidity probe readings are displayed in the header.
If a WLAN connection is enabled in addition, the Bluetooth data transfer
is continued. However, it is not possible to establish a new connection
to a humidity probe.