Manual
Table Of Contents
- 1 About this document
- 2 Safety and disposal
- 3 Support
- 4 Scope of delivery
- 5 Product description
- 6 Commissioning
- 7 WLAN connection – using the App
- 8 Bluetooth® connection
- 9 Performing the measurement
- 9.1 Saving an image
- 9.2 Setting measuring functions
- 9.3 Image gallery
- 9.4 Scale
- 9.5 Emissivity
- 9.6 Palette
- 9.7 Image type
- 9.8 SiteRecognition
- 9.9 Voice annotation
- 9.10 Configuration
- 10 Maintenance
- 11 Technical data
- 12 Questions and answers
- 13 Accessories
7 WLAN connection – using the App
27
The password must be entered once.
4
Press Connect.
The WLAN connection to the thermal imager is established.
7.2.2 Select display
Second display
The WLAN connection to the thermal imager is established.
1
Selection -> 2nd display.
The display on the thermal imager is shown on your mobile end
device.
Remote
The WLAN connection to the thermal imager is established.
1
Selection -> Remote.
The display on the thermal imager is shown on your mobile end
device. The image is saved in the gallery on the device as soon as the
trigger is pressed. The thermal imager can be controlled and settings
made via the mobile terminal device.
Gallery
The WLAN connection to the thermal imager is established.
1
Selection -> Gallery.
The saved images are displayed and can be managed.