Datasheet
46
ISO calibration certificate/temperature, Surface in refrigerator,
measur
ement points -18 °C; 0 °C; +60 °C
0520 0151
DKD calibration certificate/temperature, temp. data logger; cal.
points -20°C; 0°C; +60°C
0520 0261
Accessories for testo 175 and 177
testo alarm modem GSM
Alarm
n
notification
b
by
S
SMS
o
or
e
e
-m
mail
Do you require remote control of the
measuring instrument, i.e. without the need
to be on site? The Testo alarm modem
(GSM) is attached to the portable
instrument and offers the following
functions:
- Alarm by SMS/fax/e-mail which is sent
when limit values are exceeded or the
status changes.
- Remote query of readings by mobile
phone.
- Remote readout of stored data into the
ComSoft software.
Part no. 0554 0522
Part no.
Transport and Protection
Accessories for humidity probes
Part no.
Lock for wall holder for testo 175/177 data loggers
0554 1755
Transport case for up to 5 testo 177 data loggers, testo 575
printer, testo 580 data collector and accessories
0516 1770
Metal protection cage, Ø 12 mm for humidity probes, for
measurement in flow velocities of less than 10 m/s
0554 0755
Cap with wire mesh filter, Ø 12 mm
0554 0757
Teflon sintered filter, Ø 12 mm, for corrosive substances, high
humidity range (long-term measur
ements), high velocities
0554 0756
Stainless steel sintered cap, Ø 12 mm, is screwed onto
humidity probe, for measurements at high flow velocities or in
contaminated air
0554 0647
• Fast-action print mechanism, 6 lines/s
• Prints tables/graphics
• Brief info. or full memory can be
printed as required
• Determine section to be printed
• Your language can be set
• Self-adhesive Testo paper can also be
used
testo 575 fast printer
Part no. 0554 1775
Fast printout and logger rebooting with testo 575
• Can read out up to 25 full testo 175
loggers or 10 full testo 177 loggers
• Displays all status information
• Download collected data to PC using
Testo ComSoft 3
testo 580 data collector
The testo 580 data collects data on site for
upload to PC and analysis
• Transmission of alarm messages – e.g.
when programmed limit values in the
data logger are exceeded – to external
components such as horns, lamps,
PLC etc.
• Signal transfer via floating signal output
testo 581 alarm signal
output
Part no. 0554 1769
• Fast transfer of readings
• Use of an existing network without
additional cabling
• Long transmission paths
• Identification of measuring instruments
in system network
• In connection with ComSoft 3
Ethernet adapter
Part no. 0554 1711
Printer and Accessories
ISO cal. cert./humidity, humidity data logger; calibration points
11.3%RH and 75.3%RH at +25°C
0520 0076
DKD calibration cert./humidity, humidity data logger; cal. points
11.3%RH and 75.3%RH at +25°C
0520 0246
testo 580 data collector set with RS232, readout holders
included, for testo 175/177 data loggers
0554 1778
testo 581 alarm signal output, floating, for testo 175/177,
forwards information efficiently when limits are exceeded to e.g.
horns, lamps, PLC etc.
0554 1769
0515 0177
Battery, 3.6 V/1.9 Ah 1AA, for testo 175-T1/175-T2 and all
testo 177 loggers
testo saline pots for control and humidity adjustment of
humidity probes, 11.3 %RH and 75.3 %RH with adapter for
humidity probe
0554 0660
Fast testo 575 printer, incl. 1 roll of thermal paper and batteries,
infrared thermal line printer with graphics function
0554 1775
Spare thermal paper for printer (6 rolls)
0554 0569
Spare thermal paper for printer (6 rolls), measurement data
documentation legible for up to 10 years
0554 0568
Label thermal paper (Testo patent) for testo 575 printer (6 rolls),
can be applied directly
0554 0561
Part no. Software
For
t
testo
1
177:
ComSoft 3 Set - Basic with RS 232 interface,
Basic software with diagram and table function, incl. desk-top
holder, PC connection cable
0554 1774
For
t
testo
1
177:
ComSoft 3 Set - Basic with USB interface, Basic
softwar
e with diagram and table function, incl. desk-top
holders, PC connection cable
0554 1767
ComSoft 3 - Professional with data management, incl.
database, analysis and graphics function, data analysis, trend
curve (without interface)
0554 0830
ComSoft 3 - For requirements to CFR 21 Part 11, incl.
database, analysis and graphics function, data analysis, trend
curve (w/o interface)
0554 0821
RS232 interface for testo 175/177 incl. desk-top holders, PC
connection cable, (please also order for ComSoft 3 -
Professional)
0554 1757
USB interface, for testo 175/177 incl. desk-top holders, PC
conn. cable, (Please order with ComSoft 3 - Professional)
0554 1768
Ethernet adapter, RS232 - Ethernet incl. software driver, mains
unit, facilitates data communication in network
0554 1711
Part no.
Testo alarm modem GSM
Alarm modem GSM
0554 0522
Part no.
Additional accessories Part no.
Calibration Certificates Part no.
RS232 Version
Part no. 0554 1778
USB version
Part no. 0554 1764
testo 580 data collector set with USB, readout holders
included, for testo 175/177 data loggers
0554 1764
Software Testo Alarm-Editor Professional AK20
0554 0519
Software Testo Alarm-Editor Basic AK4
0554 0518
Stick aerial for screwing in
0554 0523
Magnetic foot aerial with 3 m cable
0554 0524
Mains unit (rail mounting) 90 to 264 VAC/ 24 VDC (2.5A)
0554 1749
Mains unit
0554 1142
Serial interface cable (RS232)
for initial parameterization of the alarm modem
0449 0051
0515 0177
Battery, 3.6 V/1.9 Ah 1AA, for testo 175-T1/175-T2 and all
testo 177 loggers
For
t
testo
1
175:
ComSoft 3 Set - Basic with RS 232 interface,
Basic softwar
e with diagram and table function, incl. desk-top
holder, PC connection cable
0554 1759
For
t
testo
1
175:
ComSoft 3 Set - Basic with USB interface, Basic
softwar
e with diagram and table function, incl. desk-top
holders, PC connection cable
0554 1766