Instructions

6. Offset Adjustment
If the offset voltage is too large, short the input leads and turn the adjust variable resistor
(DC voltage adjustment) which you find in the hole of the panel by using a flat-head
screwdriver until the offset voltage is lowest.
7. Available Power Sources
a. 4 x AA batteries
b. Mains adaptor (6VDC/60mA or regulated 9VDC/40mA),
c. Lemo
®
Power Cord, for oscilloscopes with power output - Lemo
®
connector.
d. Probus
®
Power Cord, for oscilloscopes with power output - Probus
®
connector.
e. USB Power Cord, for oscilloscopes which offer USB connector.
8. Accessories supplied
Type Order-No. Description
TT-SI G3 15105
HV Alligator Clips red and black
TT-SI NT 15100 Mains Adapter
TT-SI HC 15160
Hardcase
9. Optional Accessories
Type Order-No. Description
TT-SI PROBUS 15150
Power Lead with PROBUS-Connector
TT-SI LEMO 15151
Power Lead with LEMO-Connector
TT-SI USB 15152
Power Lead with USB-Connector
TT-SI EPL1 15140
1 to 3 Power Splitter
TT-SI EPL2 15141
1 to 4 Power Splitter
Lemo® and Probus® are the registered trademarks