Manualshelf

User Manual

ManualsBrandsTESmart ManualsComputers & AccessoriesDisplayPort + HDMI Dual Monitor KVM Switch Support UHD 4K@60Hz USB 2.0 Devices Control Up to 2 Computers with (DP+HDMI+USB) Input Ports and 2 Montiors with HDMI Port (Grey)
12345678910
Table Of Contents
7
F1
+ +
Right
-Ctrl
Right
-Ctrl
Switch the control hotkey
to [Scroll Lock]
F1
+ +
Switch the control hotkey
to [Right-Ctrl]
If no [Scroll Lock] key on your keyboard or the [Scroll Lock] key is
used for other functionality, you can take [Right-Ctrl] hotkey instead
of [Scroll Lock] key by below way:
Execute hotkey command [Scroll Lock]+[Scroll Lock]+[F1].
HOW TO CHANGE THE HOT KEYS COMBINATION:
Turn on the KVM, press [Scroll Lock] + [Scroll Lock] + [F3]，if
buzzer beeping twice, the KVM is in keyboard and mouse pass
through mode. And beeping once means in keyboard and mouse
emulation mode.
How to identify whether the KVM is in keyboard and
mouse pass through mode?
The same if you want to change the hotkey from [Right-Ctrl] to
[Scroll Lock], you could do as follows:
Execute hotkey command: [Right-Ctrl]+[Right-Ctrl]+[F1].
After you had done as above , the hotkey combinations would be changed to:
[Right-Ctrl]+[Right-Ctrl]+[xxx].
Note: xxx refers to keyboard key 1~4, F11, F2, F3.
HDMIDP