Model X Owner`s Manual

Adjusting Second Row Monopost
Seats
A Model X equipped with monopost seating
can accommodate either two or three
passengers in the second row, depending on
the option chosen at time of purchase. There
are two ways to adjust the position of these
seats:
Touch Controls > Seats on the
touchscreen.
Use the manual adjustments illustrated
below. In addition to moving a seat
forward/rearward, the manual seat
adjustments allow you to adjust the
backrest. Although the control on the
outside seats are L-shaped and the
control on the middle seat is circular, they
both provide the same functions.
1. Move seat forward/backward.
2. Adjust backrest.
Note: The backrest locks into position
when you release the lever. If a
backrest is not locked into position
when a driving gear is engaged, the
instrument panel displays an alert for
the unlocked backrest. Adjust the
backrest again, ensuring it locks into
position.
Adjusting Second Row Bench Seats
A Model X equipped with bench seats can
accommodate up to three passengers in the
second row. Use the mechanical adjustment
lever located at each outboard seating
position to fold or recline the seatbacks. The
bench seat is split 60/40 so the adjustment
lever on the left side moves the seatbacks for
both the left and center seats (whereas the
lever on the right moves the rightmost
seatback only).
While pulling and holding the lever, move the
seatback to the desired position, then release
the lever. When returning a seatback to its
upright position, push and pull to ensure it is
securely latched into position.
Note: A bench seat on
five-seat vehicles can
not be adjusted forward or rearward.
Front and Rear Seats
Seating and Safety Restraints 19