User Manual

1
Disconnect 12V and high voltage power (refer to the appropriate
section in BR-17-17-004, "Disconnecting 12V and High Voltage Power on
Model 3").
WARNING: Before disconnecting the 12V power supply, make sure that
all windows are at least slightly open. Attempting to open a door with a
fully-closed window when the 12V power supply is disconnected could
result in door glass shatter.
NOTE: Before disconnecting the 12V power supply, make sure that the
driver’s door window is fully open. Failure to lower the driver's door
window before disconnecting the 12V power supply could result in
vehicle lockout.
2
Before working on the vehicle, make sure that high voltage current is
not present (refer to the appropriate section in BR-17-17-004,
"Disconnecting 12V and High Voltage Power on Model 3").
WARNING: Only technicians who have been trained in High Voltage
Awareness are permitted to perform the Vehicle Electrical Isolation
procedure. Proper personal protective equipment (PPE) and insulating
high voltage gloves with a minimum rating of class 0 (1000V) must be
worn any time a high voltage cable is handled. Refer to TN-15-92-003,
"High Voltage Awareness Care Points" for additional safety information.
Toeboard Outer
Prerequisites
TESLA BODY REPAIR MANUAL
For feedback on the accuracy of this document, email [e-mail].
Updated: 18APR19 4