User Manual
Table Of Contents
- Front Frame Rail Outer (Complete)
- Parts List
- Repair Information
- Prerequisites
- Removal
- Replacement
- Prepare for installation.
- Prepare the surfaces.
- Apply structural adhesive.
- Install the new component.
- After refinishing, use a 360-degree spray wand of suitable length to ap
- Prime any bare metal with a suitable corrosion-resistant epoxy primer.
- Install the new Shotgun Shear Wall.
- Install the new Torque Box Cover Assembly.
4
Install the new component (continued).
F
T
emporarily install an M6 bolt through the existing hole on the top
of the Front Frame Rail.
NOTE: T
he M6 bolt was removed with the Shotgun Shear Wall. A
new bolt is not needed for this step.
NOTE: Do not t
orque the bolt at this time, as it will be removed
when installing the Shotgun Shear Wall.
Front Frame Rail Outer (Complete)
Replacement
TESLA BODY REPAIR MANUAL
F
or feedback on the accuracy of this document, email BodyRepair@tesla.com.
Updated: 24JAN18 24