User Manual
Table Of Contents
- Front Frame Rail Outer (Complete)
- Parts List
- Repair Information
- Prerequisites
- Removal
- Replacement
- Prepare for installation.
- Prepare the surfaces.
- Apply structural adhesive.
- Install the new component.
- After refinishing, use a 360-degree spray wand of suitable length to ap
- Prime any bare metal with a suitable corrosion-resistant epoxy primer.
- Install the new Shotgun Shear Wall.
- Install the new Torque Box Cover Assembly.
3
Apply structural adhesive.
A
Spr
ead a thin coating of structural adhesive as a primer layer on the
bond paths on the vehicle and the new component.
NOTE: As
sembly must be performed while the primer layer is still
wet. The drying time of the adhesive varies depending on
temperature and humidity.
Front Frame Rail Outer (Complete)
Replacement
TESLA BODY REPAIR MANUAL
F
or feedback on the accuracy of this document, email BodyRepair@tesla.com.
Updated: 24JAN18 19