User Manual
Table Of Contents
- Front Frame Rail Outer (Complete)
- Parts List
- Repair Information
- Prerequisites
- Removal
- Replacement
- Prepare for installation.
- Prepare the surfaces.
- Apply structural adhesive.
- Install the new component.
- After refinishing, use a 360-degree spray wand of suitable length to ap
- Prime any bare metal with a suitable corrosion-resistant epoxy primer.
- Install the new Shotgun Shear Wall.
- Install the new Torque Box Cover Assembly.
1
Prepare for installation (continued).
D
Use a drill with a 6.7 mm (17/64 in) bit t
o drill holes for structural
rivets and a structural countersunk rivet.
CAUTION: Drill holes f
or countersunk rivets far enough away from
the corners and any other obstructions to provide enough clearance
(approximately 18 mm or 11/16 in) for the Microstop countersink cage
assembly.
E
Use a drill with the Micr
ostop countersink cage assembly and the
appropriate-sized countersink bit to countersink the hole (Microstop
Countersink Kit, Tesla p/n 1133101-00-A).
NOTE: If the depth adjus
tment for the Microstop countersink cage
assembly has not already been set, do the procedure in the
Microstop Countersink Kit tool instructions to adjust the tool.
Front Frame Rail Outer (Complete)
Replacement
TESLA BODY REPAIR MANUAL
F
or feedback on the accuracy of this document, email BodyRepair@tesla.com.
Updated: 24JAN18 14