User Manual
Table Of Contents
- Front Frame Rail Outer (Complete)
- Parts List
- Repair Information
- Prerequisites
- Removal
- Replacement
- Prepare for installation.
- Prepare the surfaces.
- Apply structural adhesive.
- Install the new component.
- After refinishing, use a 360-degree spray wand of suitable length to ap
- Prime any bare metal with a suitable corrosion-resistant epoxy primer.
- Install the new Shotgun Shear Wall.
- Install the new Torque Box Cover Assembly.
1
Prepare for installation (continued).
C
Mark the f
astener locations on the new component.
Structural Countersunk Rivet, 6.5 mm (x1)
High Strength Structural Rivet, 6.5 mm (x25)
Installation Spot Weld
NOTE: Mak
e sure the brake pedal is moved out of the way.
NOTE: Holes for countersunk rivets must be marked far enough
away from the corners and any other obstructions to provide
enough clearance (approximately 18 mm or 11/16 in) for the
Microstop countersink cage assembly.
Front Frame Rail Outer (Complete)
Replacement
TESLA BODY REPAIR MANUAL
F
or feedback on the accuracy of this document, email BodyRepair@tesla.com.
Updated: 24JAN18 13